Fire lane floor tape - keep clear
Fire Lane Keep Clear - floor tape on wareshouse floor
Fire lane floor tape - keep clear
Fire Lane Keep Clear - floor tape on wareshouse floor
  • SKU: st2x100_FLKC
  • Brand: Pristine Products, LLC

Fire Lane - Keep Clear Floor Tape

Mark floor with "Fire Lane - Keep Clear" repeating message tape to clear emergency pathways and improve workplace safety. Intended for indoor industrial use, our floor tapes are made to stand up to forklift and heavy pedestrian traffic. Also suitable for hospitals, fire houses, retail stores, service centers and more. 

Strong .027" thick tape is made with strong adhesive and tough plastic to keep the tape in tact and on the floor.

Roll can be used as one continuous 100 ft. stripe for a large boundary or cut into multiple segments to mark smaller areas. This tape is sure the grab attention. Compared to painted floor lines, the message is clearer, easier to apply, and last longer in most cases. 

Available in 2", 3", 4" or 6" widths. All 100 ft rolls.

Interested in outdoor fire lane tape? Reach out to us - we'd love to discuss potential options. 

Read More...

Regular price $178.00
  • Delivering since 2010
  • Satisfaction Guaranteed
  • Secure Checkout
  • Description
  • Features
  • ACCESSORIES
  • INSTRUCTIONS
Description

Mark floor with "Fire Lane - Keep Clear" repeating message tape to clear emergency pathways and improve workplace safety. Intended for indoor industrial use, our floor tapes are made to stand up to forklift and heavy pedestrian traffic. Also suitable for hospitals, fire houses, retail stores, service centers and more. 

Strong .027" thick tape is made with strong adhesive and tough plastic to keep the tape in tact and on the floor.

Roll can be used as one continuous 100 ft. stripe for a large boundary or cut into multiple segments to mark smaller areas. This tape is sure the grab attention. Compared to painted floor lines, the message is clearer, easier to apply, and last longer in most cases. 

Available in 2", 3", 4" or 6" widths. All 100 ft rolls.

Interested in outdoor fire lane tape? Reach out to us - we'd love to discuss potential options. 

features

Fire Lane Floor Tape Features:

  • 100 ft roll 
  • "FIRE LANE - KEEP CLEAR" Text repeating
    • Yellow with black text
    • Simple and clear - all caps
  • Industrial Grade tape construction
    • High strength plastic film
    • Strong rubber adhesive
    • .027" thickness in total
  • Scuff resistant surface
  • Cleans up great 
    • With industrial floor scrubber or by hand
  • Frosted surface texture for slip resistance
  • Multiple tape widths available
    • For max legibility and safety, we recommend 4" or 6"

Accessories

  • We make custom floor tape. Want any changes to this product? - we can do that
    • Color, text, font, language, graphics
    • Different size or specific message frequency
    • Add your logo to the tape
  • Reach out to us - were happy to help


  • Outdoor tape options - let's to discuss your application

Instuction

Floor Tape Install Instructions

Before Installation:

  1. Determine areas to be marked with tape
  2. Clean floor thoroughly with industrial floor cleaner, or by hand with soap and water
  3. Allow floor to dry and make sure floor is above 55°F
  4. Set up a temporary reference line or determine an existing line on the floor for reference to keep tape on a straight path

Installation IF NOT USING AN APPLICATOR 

  1. Remove a section of the backing  approximately 4" from the end of the tape, exposing the adhesive
  2. Unroll a long section of tape and align with the reference line
  3. Once positioned as desired, apply the exposed adhesive to the floor, applying pressure and wiping with hand to ensure good adhesion
  4. Peel the backing from the adhesive gradually to expose more adhesive and apply to the floor, using the reference line to guide
  5. Continue applying - working your way down the floor to the desired point
  6. At the end point cut the tape with scissors*

Installation IF USING AN APPLICATOR:

  1. Wrap the tape through the applicator as directed in applicator instructions
  2. Remove backing and and mount to the roller instructed
  3. Locate the applicator at the desired start point and push, using the reference line to guide and walking over the newly applied line to ensure adhesion
  4. Once at the end point, use a scissors to cut*

*Tip: If installing another tape line at an angle, apply the tape a few inches beyond the desired end location. Apply the new line starting at the desired location, overlapping with the previous tape. Once complete, use a scissors to cut both tape layers, creating a  nearly seamless continuation.