Use this industrial floor tape to clearly identify areas that require a steel toe shoes for safe entry. Marking these areas will increase PPE requirement awareness and compliance.
The heavy duty .027" thick tape is made with strong adhesive and tough plastic to keep the tape in tact and on the floor in areas with heavy forklift and pedestrian traffic.
Can be used in one continuous 100ft stripe or cut into multiple segments to mark smaller areas. This tape is sure the grab attention. Compared to painted floor lines, the message is clearer, easier to apply, and last longer in most cases.
Available in 2", 3", 4" or 6" widths. All rolls contain 100 ft of floor tape.
In need of a specific PPE message tape or custom message floor tape with your specific text and graphics? We can help! Reach out to us and we'll get our graphics team working to create the perfect tape for your project.
- 100 ft roll
- "STEEL TOE SHOES REQUIRED" Text repeating
- Yellow with black text
- Simple and clear - all caps
- With steel toe work boot graphic
- Industrial Grade tape construction
- High strength plastic film
- Strong rubber adhesive
- .027" thickness in total
- Scuff resistant surface
- Cleans up great
- With industrial floor scrubber or by hand
- Frosted surface texture for slip resistance
- Multiple tape widths available
We make custom floor tape. Want any changes to this product? - we can do that!
- Add your logo to the tape
- Different size or specific message frequency
- Color, text, font, language, graphics
- Reach out to us - were happy to help
- Interested in outdoor tape? Give us a call- let's to discuss your application and potential options
- Determine areas to be marked with tape
- Clean floor thoroughly with industrial floor cleaner, or by hand with soap and water
- Allow floor to dry and make sure floor is above 55°F
- Set up a temporary reference line or determine an existing line on the floor for reference to keep tape on a straight path
Installation IF NOT USING AN APPLICATOR
- Remove a section of the backing approximately 4" from the end of the tape, exposing the adhesive
- Unroll a long section of tape and align with the reference line
- Once positioned as desired, apply the exposed adhesive to the floor, applying pressure and wiping with hand to ensure good adhesion
- Peel the backing from the adhesive gradually to expose more adhesive and apply to the floor, using the reference line to guide
- Continue applying - working your way down the floor to the desired point
- At the end point cut the tape with scissors*
Installation IF USING AN APPLICATOR:
- Wrap the tape through the applicator as directed in applicator instructions
- Remove backing and and mount to the roller instructed
- Locate the applicator at the desired start point and push, using the reference line to guide and walking over the newly applied line to ensure adhesion
- Once at the end point, use a scissors to cut*
*Tip: If installing another tape line at an angle, apply the tape a few inches beyond the desired end location. Apply the new line starting at the desired location, overlapping with the previous tape. Once complete, use a scissors to cut both tape layers, creating a nearly seamless continuation.